Tips in Removing Textured Ceiling


Removing Popcorn Ceiling is a fascinating project. It not only includes extracting the old ceiling, but likewise includes rewiring your house so that a new ceiling can be installed. However before you proceed with the project, you must do the proper research study about the entire process so that you know what to anticipate. And in case you are not knowledgeable about the extraction of the popcorn ceiling, here is a step by step guide that will assist you.

When removing popcorn ceiling, make sure that you use protective gloves and shatterproof glass, as they will protect you from any risk of injury when working. After selecting the favored removal specialist, pay a visit to his office and ensure that whatever is ready for the project. In addition to the devices, you will need to rent or buy a saw, screwdriver, hammer and other tools. Also, bring any heavy items with you to ensure that they too are safe during the extraction.

There are 2 common methods of extracting popcorn ceilings. The very first one is to use drywall glue or tape to slow to the ceiling. The benefit of this technique is that it requires little effort; nevertheless, the problem with it is that it may not completely extract the popcorn. Moreover, the drywall glue or tape is a bit messy, which may make the whole job hard.

The 2nd suggested way for extracting popcorn ceiling is by utilizing drilling makers or sturdy industrial trucks with cranes to extract them. In order to successfully extract it, make certain that you extract all the light fixtures and other heavy fixtures present on the ceiling. Furthermore, remove all the tiles and lighting fixtures present in the room. Remove any sort of designs to make it easier to access the screws or the jambs that can be extracted.

Scrapers are used for smoothing out the texture or coating on the walls and ceiling. It is best to use an old toothbrush or cotton swab as it allows scraping without harming your floors or furnishings. Take note that if there is any texture on the wall, ensure to smooth it out using scraper. However, if you are planning to scrape without damaging your surfaces, you can use the very same things for the purpose. Simply wet the object, spread it on the wall and enable it to sink into the wall or floor.

Utilize the fiber brush and scrape along the surface of the product. Make sure you wear safety gloves when utilizing the asbestos scraper to prevent getting exposed to the substance. If the substance is exposed, it may trigger some health problems like shortness of breath, coughing, swelling of the lung tissue and other related health problems. When you have scraped enough, you remove texture ceiling in Austin, TX need to now have the ability to see the popcorn. Now that the popcorn is removed, you can move on to the painting task.

Prior to applying the paint, you require to take off all decors on the ceilings. It is better to remove them before using the paint due to the fact that you will not need to sand them later on. The next action is to use a thin coat of paint on the ceiling utilizing the supplied brush. This will cover the popcorn texture left on the ceilings.

For the third and last step, put the textured ceiling panels on top of the old one and let it dry for a couple of hours. You can then return to the lighting fixtures and change the lighting fixtures. Before installing the lighting fixtures on the ceilings, make sure that the panels are set up correctly so that there is a brand-new layer of texture applied and that the new layer matches the texture of the ceiling perfectly.

Learn More:

Popcorn Ceiling Removal Austin

2882 Barton Skyway #239 A

Austin, TX 78746